Zanussi ZCAN26EW1 Notice D'utilisation page 60

7. Rotate the drain plug 180 degrees to let the
drain water flow into the tray.
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
There are sounds which may occur during the operation of the appliance (e.g. bubbling,
whirring, cracking or clicking), which are normal.
Problem
The appliance does not oper-
ate.
60
8. Clean the interior and dry it thoroughly.
9. Switch on the appliance.
10. Set the temperature to higher setting and close
the lid. Wait two or three hours before you
reload previously removed food into the
appliance.
11. Set the temperature to the desired setting.
Possible cause
The appliance is switched off.
Make sure the water does not spill out
of the tray.
Solution
Switch on the appliance.