Zanussi ZCAN26EW1 Notice D'utilisation page 59

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CLEANING
CAUTION! Unplug the appliance
before carrying out any maintenance
operation.
Do not use detergents, abrasive
products, highly perfumed cleaning
products or wax polishes to clean the
inner side of the appliance.
Do not use the steam cleaners to
clean the appliance.
Prevent damage to the cooling system.
1. Switch off the appliance.
2. Remove any stored food, wrap it in several
layers of newspaper and put it in a cool place.
3. Regularly clean the appliance and the
accessories with warm water and neutral soap.
Clean the lid seal carefully.
4. Fully dry the appliance.
5. Connect the mains plug to the mains socket.
6. Switch on the appliance.
7. Set the temperature to MAX setting and close
the lid. Wait two or three hours before you
reload previously removed food into the
appliance.
8. Set the temperature to the desired setting.
SCRAPING OFF THE FROST
CAUTION! Never use sharp metal
tools to scrape off built-up frost as
they could damage the appliance.
Frost may build up on the surface of cabinet frame
or inner liner after a period of using time.
It is recommended to scrape away the frost with
the plastic ice scraper (included in accessories
bag) each month.
DEFROSTING THE FREEZER
CAUTION! Do not use a mechanical
or electrical device to speed up the
thawing process. Do not use any
artificial means.
Defrost the freezer when the frost layer reaches a
thickness of about 4-5 mm.
1. Switch off the appliance.
2. Remove any stored food, wrap it in several
layers of newspaper and put it in a cool place.
3. Remove the drain plug from the inside of the
appliance.
4. Leave the lid open.
5. Place a tray beneath the outer drain plug.
6. Pull out the outer drain plug.
59

Publicité

Table des Matières
loading

Table des Matières