Connecting The Charger/Charging The Li-Ion Battery; Durati Battery-Powered Shearing Machine Function Test; Function Checks Of The Charger - Aesculap DURATI Mode D'emploi

4.1.4 Connecting the charger/Charging the
Li-ion battery
Fire hazard due to battery poles
shorted by fluids or metal compo-
nents!
Li-ion battery not inserted
WARNING
Risk of injury and material damage
due to damaged Li-ion batteries!
Prior to charging, check the Li-
WARNING ion batteries for any damage.
Do not use or charge damaged
Li-ion batteries.
Loss of capacity/performance due
to prolonged storage of discharged
Li-ion batteries!
Store Li-ion batteries only in
CAUTION
fully charged condition and
recharge stored batteries once
every month.
Destruction of the product, charg-
ing bay or Li-ion battery when
inserting the wrong type of battery
in the charging bay!
CAUTION
Insert Li-ion batteries only in
the appropriate charging bay.
Insert the Li-ion battery in the
correct position.
Note
Switch off the DURATI battery-powered shearing
machine before charging!
Note
Li-ion batteries heat up slightly during charging.
Note
Unplug the mains power cord at the mains socket when
the charger is not going to be used!
Connect charger 4: plug the device plug of the
mains power cord 5 into the charger 4.
Plug in the mains plug of mains power cord 5 at
the mains power socket.
Insert Li-ion battery 7 in charging bay 6 of
charger 4 and charge the battery.
- or -
Insert the DURATI battery-powered shearing
machine 2 in charging bay 10 of the charger 4 and
charge the machine
Charge status indicator 8 or 9 blinks green.
After charging, the charge state indicator 8/9
lights up green and the DURATI battery-powered
shearing machine 2 / with Li-ion battery 7 is ready
for operation.
4.2 DURATI battery-powered shearing
machine function test
Carry out a visual inspection.
Check the switch position.
Install the battery, see Li-ion battery.
Mount the shearing head correctly and lubricate it
if necessary, see Safe handling: Blade.
Keep a charged Li-ion battery on hand, as reserve.
Clean DURATI battery-powered shearing machine
prior to use, see Cleaning/Disinfection.

4.3 Function checks of the charger

Carry out a visual inspection.
Prior to connecting the product to mains power:
– Check the mains power cord 5 for any damage.
– Check the product for possible damage (e. g.
check for bent contacts of the charging bays).
Plug in mains power cord 5 at the device socket of
the charging station.
Plug in the mains plug at the mains power socket.
Insert Li-ion battery 7 in charging bay 6 of
charger 4 and charge the battery.
- or -
7