VONROC CS501DC Traduction De La Notice Originale page 8

EN
2. MACHINE INFORMATION
Intended use
This cordless circular saw is intended for length-
wise, crosswise and bevel cutting in wood while
keeping the baseplate resting firmly on the work-
piece. Sawing plastics or metals is not permitted.
The power tool with the fitted sawblade is designed
with sufficient capacity for sawing hardwood and
softwood as well as chipboard and fibreboard. The
sawblade is not designed for cutting firewood. Do
not use the saw to cut materials other than those
specified described in manual.
TECHNICAL SPECIFICATIONS
Model No.
Voltage
No load speed
Saw blade size
Sawing capacity 0°
Sawing capacity 45°
Weight
Sound pressure level L
Sound power level L
WA
Vibration
Only use the following batteries of the VONROC
POWER 20V battery platform. Using any other
batteries could cause serious injury or damage the
tool.
CD801AA
CD803AA
The following charger of the can be used to charge
these batteries.
CD802AA
The batteries of the VONROC POWER 20V battery
platform are interchangeable with all the VONROC
POWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
8
CS501DC
20V
4000 /min
Ø150×Ø16×1.6mm
48mm
36mm
2.1 kg
75.3 dB(A), K=3dB(A)
PA
86.3 dB(A), K=3dB(A)
3.015 m/s K=1.5 m/s
2
20V, 2Ah Lithium-Ion
20V, 4Ah Lithium-Ion
Quick charger
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work pat-
terns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. Lock-off button
2. On/Off switch
3. Laser switch
4. Auxiliary handle
5. Laser
6. Scale for bevel angle
7. Wing bolt for bevel angle
8. Cutting mark, 45°
9. Cutting mark, 0°
10. Wing bolt for parallel guide
11. Handle
12A. Vacuum connection
2
12B. Vacuum adapter
13. Lever for retracting lower guard
14. Upper guard
15. Clamping bolt
16. Clamping flange
17. Baseplate
18. Lower guard
19. Battery unlock button
20. Battery
21. Spindle lock
22. Wing bolt for depth adjustment
23. Scale for depth adjustment
24. Parallel guide
25. Laser adjustment screw
3. ASSEMBLY
Before any work on the power tool, remove
the battery.
The battery must be charged before first use.
WWW.VONROC.COM