PIONEER DJ DDJ-XP2 Mode D'emploi page 11

Launching the system
First, you need to connect your PC/Mac to a Serato DJ Pro-compatible DJ controller or DJ mixer.
• For detailed information on using the Serato DJ Pro software, and the Serato DJ Pro-compatible DJ mixer or DJ controller, see their respective
operating instructions.
1 Connect the Serato DJ Pro-compatible DJ mixer or DJ controller to your PC/Mac using a USB cable.
2 Turn on your PC/Mac.
3 Turn on the Serato DJ Pro-compatible DJ mixer or DJ controller.
4 Launch Serato DJ Pro.
– For Mac
In Finder, open the [Applications] folder, then click the [Serato DJ Pro] icon.
– For Windows 10
From the [Start] menu, click [Serato] > [Serato DJ Pro] icon.
– For Windows 8.1
From [Apps view], click the [Serato DJ Pro] icon.
– For Windows 7
In the Windows [Start] menu, open [All Programs] > [Serato] > [Serato DJ Pro].
5 Connect the unit to your PC/Mac using the supplied USB cable.
When the unit and Serato DJ Pro are properly connected, the unit's pad mode button (by default, the [PAD MODE 1] mode button) lights.
• The unit works with the standard driver of your PC/Mac's operating system. You don't need to install separate driver software for the unit.
Playing tracks
Operate the DJ player, analog player, DJ controller etc. to play tracks.
• For detailed information on using the Serato DJ Pro software, and the Serato DJ Pro-compatible DJ mixer or DJ controller, see their respective
operating instructions.
Quitting the system
1 Quit Serato DJ Pro.
When you close the software, a question appears on your PC/Mac screen asking for confirmation that you want to close it. Click [Yes] to close.
2 Disconnect the USB cable from your PC/Mac.
11
En