Ceado B209 Manuel D'utilisation page 18

18
TROUBLESHOOTING
In case of any malfunction, defect of the appliance or if you suspect any breakage after a fall, unplug
the appliance immediately.
If you are unable to solve the problem referring to the table below, contact an Authorized Service
center.
Only qualified experts should repair the appliance.
We are not liable for any damage caused by repairs not made correctly by unauthorized personnel.
In these cases the warranty does not apply.
Problem
The blender does not start.
The blades do not turn with
the motor on.
Noise and vibration of
container.
Leakage of liquid from
container.
Make sure it is plugged in.
•
Make sure the safety circuit breaker is closed.
•
Make sure the magnetic sensor in the lid is touching the
•
safety arm.
Make sure the switch on the blender is turned to ON.
•
If the problem occurs after a long period of intensive use the
•
motor may have overheated. Wait at least 20 minutes and try
again. If you put the blender in a cool place this will reduce
the waiting time.
If the problem occurs after an overload, the circuit breaker on
•
the motor may have been tripped! Push the button on the
back or bottom of the appliance (not standard equipment on
all models).
Make sure the blades and motor revolve freely.
•
Make sure the rubber clutch is in good condition.
•
Make sure the container is correctly fitted on the base.
•
Make sure the lock ring, blades and joints are securely
•
tightened.
Make sure the rubber clutch is not damaged.
•
Make sure the lock ring is tightly fastened.
•
Solution
GB