Ceado B209 Manuel D'utilisation page 17

GB
To clean the motor base, unplug the appliance and clean with a damp cloth or alcohol, or use
a generic detergent spray.
Dry with a dry cloth.
Never wash the blender with jets of water or immerse the motor base.
To clean the container: after rinsing the container and lid under the tap, fill the container
halfway with warm water and a spoonful of dishwashing detergent. Fit the container on the
base, cover with the lid and run for 20 seconds. Remove the container and rinse with running
water. Repeat the operation with 1 liter of warm water and 5 ml of bleach. Remove the
container, rinse and dry the container by turning it upside down on the drainboard. Wash the
lid with warm water and dishwashing detergent.
Do not expose the lid to temperatures above 60°C. This would damage the magnetic
sensor.
For thorough periodical cleaning remove the blades as shown in figures 5, 6, 7 and 8.
Wash in warm water with dishwashing detergent and use a small brush to remove any solid
residue.
Reassemble in reverse order and make sure to tighten all parts.
Unscrewing the lock ring
No. 10 socket
wrench
Disassembling blade
Bottom of
container
Fig. 5
Turn clockwise
to unscrew
Fig. 7
Removal of blade assembly
Blade assembly parts
17
Blade assembly
Lock ring
Fig. 6
Nut
Blade
Bearing
assembly
Fig. 8