Initializing This Unit - Sony TMR-BT8iP Mode D'emploi

Initializing this unit

You can reset this unit to its default and delete all pairing
information.
1
Connect the unit to the iPod.
2
Press and hold the power button for more than about 15 seconds.
During these 15 seconds, the indicator changes in sequence as
follows:
– flash (at about 1 second intervals) for about 5 seconds
– flash quickly for about 5 seconds
– lights up for about 5 seconds
– flash 4 times
Then, the unit is reset to default setting and all pairing
information is deleted.
Note
Do not operate your iPod while initializing this unit.
21
US