Urmet 1092/278HZ Manuel D'utilisation page 27

COLOR
With this option camera images are always in color mode and the camera does not switch in Night mode
(B/W). During the night or under conditions of poor illumination, with the IR illumination, images are in black
and white anyway.
AUTO
This option selects the DAY/NIGHT switching modes: delay (in seconds) and AGC to be applied in each
mode:
D N
D N
N D
N D
RETURN
Option
DAY / NIGHT
NIGHT / DAY
B/W
With this option, camera images are always in black/white mode. Select B/W option to access the following
submenu:
BURST
IR SMART
RETURN
Option
BURST
IR SMART
DS1092-239
D&N AUTO
(AGC)
■■■■■█■■■182
(DELAY) █■■■■■■■■■1
(AGC)
■■■■■█■■■182
(DELAY) █■■■■■■■■■1
RET
Value
With AGC you can select the AGC (Automatic Gain
Control)) to be used in NIGHT mode.
AGC ÷ DELAY
With DELAY you can select the time for the switching
from DAY to NIGHT.
With AGC you can select the AGC (Automatic Gain
Control)) to be used in DAY mode.
AGC ÷ DELAY
With DELAY you can select the time for the switching
from NIGHT to DAY.
D&N B&W
OFF
OFF
RET
Value
If set to ON, the colour burst is present even if the camera
ON÷ OFF
is in black/white mode.
The IR SMART function must be used with the B/W
options and allows you to select a taken scene area which
the camera adjusts the brightness automatically in.
ON÷ OFF
If ON, the camera adjusts the brightness on the selected
area in its submenus (LEVEL and AREA).
Description
Description
27