Urmet 1092/278HZ Manuel D'utilisation page 22

•
CVBS standard interlaced video output
•
Video output in COMET mode
Press the central button IN THE CENTRE to access the OSD menu of the camera.
Press the button RIGHTWARDS OR LEFTWARDS to change the camera focus.
Press the button UPWARDS OR DOWNWARDS to change the camera zoom.
CVBS and AHD standards can be selected by holding the button pressed in the CENTRE. The control
alternatively selects the CVBS and AHD standards.
Use of the COMET video mode can be selected with the CVBS video signal by means of an option in the
OSD menu (ADJUST menu).
NOTE: COME option is available only with the CVBS video output.
The presence or absence of this option therefore permits to identify if the camera is using the CVBS or
AHD video output.
MENU USE
The camera ref. 1092/278HZ uses a multi-level menu that allows to enable/disable or change camera
settings.
To have access to the main menu button, with the camera switched on and operating, unscrew the dome to
gain access to camera adjustments.
Important note:
The OSD menu activation button is joystick type; it is used to make selection operations easier.
MENUS SYSTEM DESCRIPTION
Once the menu access command has been performed pressing the central button, the access first screen
will be displayed.
Displayed items can be selected by pressing the down button.
Once the item has been selected, the parameter can be changed using the right button and choosing
among the available options, that can be displayed by pressing repeatedly the button.
By selecting the item associated to the symbols
where other changes can be performed.
To quit the menu or the submenu and confirm the executed changes, select the item EXIT
and press the central button.
To reactivate the default values select the item EXIT
MAIN MENU
SETUP (DEFAULT VALUES)
LENS
EXPOSURE
BACKLIGHT
WHITE BAL.
DAY&NIGHT
NR
SPECIAL
ADJUST
AF
EXIT
22
or
RESET and press the central button.
MANUAL
OFF
ATW
EXT
SAVE&END
it is possible to access to the next submenu,
SAVE&END
DS1092-239