3.
Remove the duplexer from the back of the printer and check for jammed paper.
Open the cover on the duplexer to remove any paper, if necessary.
Print Quality Problems
■
For the best print quality, use Epson papers (see page 4) and genuine Epson ink
cartridges (see page 20).
■
Make sure your paper is loaded printable side down (usually the whiter, brighter, or
glossy side).
■
Make sure the paper tyoe selected on the control panel or in your printer software
matches the type of paper you loaded.
■
If you notice light or dark bands across your printouts or they are too faint, run a
nozzle check (see page 17) to see if the print head needs cleaning.
■
If you notice jagged vertical lines, you may need to align the print head. See the
online User's Guide for instructions.
■
The ink cartridges may be low on ink. Check your cartridge levels (see page 19) and
replace cartridges, if necessary (see page 20).
26
Solving Problems