Lubrication Schedule - RedMax CZT60+ Manuel D'utilisation

CAUTION:
other petroleum products to clean drive
belts.
Refer to Lubrication
Lubricate the grease nipple on the pivot axle
A
with a grease gun.
Lubricate the grease nipple on the wheel
B
axle with a grease gun.
Lubricate the grease nipple with a grease
C
gun.
Replace the engine oil.
D
Replace the oil filter.
Do a check of the hydraulic oil level.
E Replace the hydraulic oil.
Replace the hydraulic oil filter.
10
For Parker HT-1000, replace each 750 h. For other qualified hydraulic oils, first change 750 h, then
each 500 h. For other hydraulic oils not listed, first change 750 h, then each 250 h.
11
For Parker HT-1000, replace each 750 h. For other qualified hydraulic oils, first change 750 h, then
each 500 h. For other hydraulic oils not listed, first change 750 h, then each 250 h.
24
Do not use gasoline or
B
C
E
10
11

Lubrication schedule

A
A C
D
Interval
Mont Year- Each
hly ly 25 h
X
X
B
C
Each Each
50 h 100 h
X
X
X
X
X
1739 - 001 - 08.11.2021
Each
500 h
X
X