Door Reversal - Nordcap FS60CP Mode D'emploi

Door Reversal

Some models have reversible doors. Follow the below mentioned instructions for door reversal from right to
left and vice versa.
This operation is easily done by carefully lying down the cabinet at its back or on a sack truck.
1. Remove the bottom panel
4. Lift the door and pull it approx. 10 cm
down.
7. Lift the door in place in the top hinge.
10.Refit the bottom hinge pin to the
bottom hinge which was turned.
13. Move the handle to the opposite
hinge side.
2. Remove the bottom hinge and the
support fitting.
5. Remove the top hinge pin.
8. Tighten the top hinge pin.
11. Fit the bottom hinge on the
opposite side.
3. Remove the top panel/canopy.
6. Fit the hinge pin at the opposite
side without tightening it.
9. Remove the bottom hinge pin and
turn the bottom hinge 90 degrees.
12. Refit the bottom panel.
37