Ortovox 3+ Mode D'emploi page 36

INSTRUCTIONS
• Now turn on the 3+. To do so, turn the
ON/OFF switch (1) counter-clockwise.
The self-test begins.
• During the self-test, press the flagging
button (8) until "PC" appears. The
now in the partner check function but
there is no transmission signal.
• Only one transmission signal can ever be
tested at a time. The minimum distance during
the partner check is 1 m; the distance to other
transmitters must be at least 5 m.
• The check looks at the transmission frequency,
the transmission duration, and the cycle
duration. "EO" means that the transmission
signal tested is fully functional.
• Warnings and defects for the inspected
transmitters are displayed as "EE".
• The partner check is completed by pressing in
the transmission switch over button (3) in
transmission mode or by pressing the flagging
button (8) in search mode (8).
3+ is
3+
1
8
EN 35