Using The Electric Breast Pump; Before Using The Pump; To Begin Pumping - Philips AVENT SCF301 Mode D'emploi

Masquer les pouces Voir aussi pour AVENT SCF301:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 67
5
Using the electric
breast pump

Before using the pump

Wash your hands thoroughly, and
make sure your breasts are clean.
Gently squeeze a little milk from
each nipple to make sure that milk
ducts are not blocked.
Make sure you follow the steps
in "Cleaning and sterilising" and
"Assembling" chapters to clean,
sterilise, and assemble the breast
pump.
Relax in a comfortable chair,
leaning slightly forward (use
cushions to support your back).
Make sure that you have a glass of
water nearby.

To begin pumping

1
Press the assembled pump
bodies against your breasts.
Make sure that your nipples are
centered, so that the massage
cushion creates an airtight seal.
Make sure that no air escapes;
otherwise there is no suction.
(Fig. 12)
2
Press the power button (
switch on your pump. (Fig. 13)
» The display panel lights up
for 1 second. The breast
pump automatically starts up
in stimulation level 1 mode
in the first time usage, and
the stimulation indicator
lights up. The appliance
has the memory function
to remember the levels for
your both stimulation and
English
12
expression in your latest
usage.
» You begin to feel the suction
on your breast.
Note
The timer starts when the
appliance is power on. The timer
indicator displays 01 after the
appliance has been power on for
1 minute. The unit is minute.
The timer will show total breast
pumping time, pause time does
not count in.
If the timer displays over 99
minutes (when it comes to 100
minutes), the machine will shut
down automatically.
3
You can choose your desired
stimulation level to stimulate
milk by pressing the level up (
and level down (
can press the level up button to
deeper the suction. Press the
level down button to lower the
suction.There are altogether 4
stimulation levels. (Fig. 14)
4
Once your milk starts flowing,
you can press the mode
selection button (
the expression mode. (Fig. 15)
) to
5
After switching to the expression
mode, you can choose your
desired expression level by
pressing the level up (
level down (
can press the level up button to
deeper the suction. Press the
level down button to lower the
suction.There are altogether 4
expression levels. (Fig. 16)
)
) buttons. You
) to switch to
) and
) buttons. You

Publicité

Table des Matières
loading

Table des Matières