Travel System - Baninni VOLTA BNST035 Mode D'emploi

TRAVEL SYSTEM

A car seat (L) and set of adaptors (M) are included to complete the travel system.
1a.
Remove the seat unit from the chassis to fit the adaptors.
Line up the adaptors with the chassis housing and press downwards. Listen for a "click" to signal correct assembly.
1b.
Place the car seat (L) onto the adaptors. Push down to "click" into place. Lift by handle to ensure car seat is secure.
Alternatively, attach the adaptors to the car seat first and then attach the car seat to the chassis.
WARNING! Never attach the car seat forward facing.
L
M
2
1