Baninni VOLTA BNST035 Mode D'emploi page 31

For extra safety, D-rings are provided for the attachment of a separate safety harness
approved to BS 6684 or BS EN 13210.
Infant car seats should not be used in place of a cot or a bed. Should your child need to
sleep then it should be placed in a suitable pram body, cot or bed.
pushchair. A basket is provided for the carriage of 2kg of items evenly distributed.
CARE OF PRODUCT
Your pushchair requires maintenance by you.
Regularly inspect the locks, brakes, harness, catches, seat adjusters, joints and fixings to
ensure they are secure and in full working order.
Brakes, wheels and tyres do wear and should be replaced if necessary.
If parts become stiff of difficult to operate, ensure dirt is not the cause, then try a light
application of a silicon lubricant, ensuring it penetrates between the components.
Regular lubrication of moving parts will extend the life of your pushchair and make ope-
ning and folding easier.
Plastic and metal parts may be sponged lightly using warm water and a mild detergent.
Dry thoroughly before storing. Refer to sewn in labels for fabric care instructions.
Never clean with abrasive, ammonia based, bleach based or spirit type cleaners.
After exposure to damp conditions, dry off with a soft cloth and leave fully open in a
warm environment. Storing damp will encourage mildew to form. Store in a dry place
Do not leave in sunlight for prolonged periods - some fabrics may fade. whichever is the
sooner. Your pushchair should be serviced and reconditioned before using it for a se-
cond baby, or within 18 months,