Step 2 : Installing The Openmg Jukebox Software - Sony MSGC-US10 Mode D'emploi

Step 2 : Installing the OpenMG Jukebox
software
PNote
Be sure to install the software before connecting the unit to your personal
computer.
Do not install the software while the dedicated USB cable is connected.
Connect the dedicated USB cable only after you have restarted the computer
after installation, and then start the OpenMG Jukebox.
Install the OpenMG Jukebox software to the hard disk drive of your
computer.
Turn on your computer and start Windows in advance. Close all
applications and follow the steps below.
When you use Windows 2000
You must log on as an Administrator.
When an older version of OpenMG Jukebox is installed
If OpenMG Jukebox icon is displayed on the Task tray, remove it from the
Task tray.
1
Insert the installation CD-ROM into the CD-ROM drive of your
computer.
The setup program starts up automatically. The OpenMG Jukebox
Ver.2.0 installation window appears.
Tip
Select the desired language if the setup language options appear.
2
Click to select [Install OpenMG Jukebox Ver.2.0 and Driver] or
[Install Driver only].
•If installing OpenMG Jukebox for the first time, select [Install
OpenMG Jukebox Ver.2.0 and Driver].
•If an older version of OpenMG Jukebox is installed, select [Install
OpenMG Jukebox Ver.2.0 and Driver] (see page 13 ).
•If OpenMG Jukebox Ver.2.0 is already installed, select [Install Driver
only] to add only the driver for a new external device/media.
continued
11-GB