Replacement Of Batteries; Functional Description; Display Backlight; Recall Of Stored Data - Lovibond MD100 Mode D'emploi

General notes - Functional description
GB

Replacement of batteries:

(F) instrument back
CAUTION:
To ensure that the instrument is water proof:
seal ring (E) must be in position
•
• battery compartment cover (B) must be fixed with the four screws
If the batteries are removed for more than one minute the date and time menu starts auto-
matically when the photometer is switched on the next time.
!
!
Zero
Test
Zero
Test
MD100_4 10/2014
(D) batteries

Display backlight

Press the [ !] key to turn the display backlight on or off. The backlight
is switched off automatically during the measurement.

Recall of stored data

If the instrument is switched on, press the [ ! ] key for more than
4 seconds to access the recall menu.
Repeating the test:
Press the [ZERO/TEST] key again.
Repeating the zero:
Press the [ZERO/TEST]
(A) screws
(C) notch
key for 2 seconds.
(B) battery compart-
ment cover
(E) seal ring
17