Ibiza Light MINIWASH MOVING HEAD Manuel D'utilisation page 7

4.3 User configurations
Setting Maximum Pan Angles
To select, use the "MODE/ESC" button and choose "PA18", "PA36",or "PA54". "UP" and "DOWN" buttons cycle
between all available Pan Angles. Press the "ENTER" button to confirm the chosen selection.
LED Display
PA18
PA36
PA54
Setting Maximum Tilt Angles
To select, use the "MODE/ESC" button and choose "t.9" or "t.18" "UP" and "DOWN" buttons cycle between all
available Tilt Angles. Press the "ENTER" button to confirm the chosen selection.
LED Display
t.9
t.18
Setting Reversed or Normal Pan
Press the "MODE/ESC" button and choose "Pan"(normal) or "r Pan" (reversed). "UP" and "DOWN" buttons cycle
between the two settings. Press the "ENTER" button to confirm the selection
Setting Reversed or Normal Tilt
Press the "MODE/ESC" button and choose "t.L" (normal) or "rt.l"(reversed)."UP" and "DOWN" buttons cycle
between the two settings. Press the "ENTER" button to confirm the selection
Setting Reversed or Normal LED Display
Press the "MODE/ESC" button and choose "d.s"(normal) or "rd.s"(reversed). "UP" and "DOWN" buttons cycle
between the two settings. Press the "ENTER" button to confirm the selection
Auto Run Mode
One of two Auto Run Sub-modes can be selected with a choice of preset speeds .This mode enables the unit to act as
a Master to other Slave units
Choosing Auto Run Sub-modes
Press the "MODE/ESC" button to display "NAFA" or "NASL". "UP" and "DOWN" buttons change between the two
initial options. With the appropriated option selected, use "ENTER" to confirm and the LED Display will change to:
"Fast" (fast) or "SloU" (slow). The unit will then run at the selected speed
Initial LED Display
NAFA
NAFL
©Copyright LOTRONIC 2012
Maximum Pan
180º
360º
540º
Maximum Tilt
90º
180º
Second LED Display
Fast
SloU
LMH350LED
Sub-mode
Fast Auto Run
Slow Auto Run
Page 7