Wall Mounting; Risk Of Electric Shock; End Of Operation; Cleaning And Care - Medion MD 15526 Mode D'emploi

7. Wall mounting

The device has fixing holes so that you can attach it to the wall.
WARNING!

Risk of electric shock!

There is a risk of electric shock due to current-carrying
cables.
 Do not drill holes into areas which may contain em-
bedded power, gas or water lines. Use a suitable
search tool to locate these lines.
 Select a suitable location on the wall. There must be adequate ventilation.
 Select two rawl plugs and screws that are suitable for the wall and size of the fix-
ing holes.
 Mark the drill holes on the wall.
 Drill the two holes and insert the rawl plugs.
 Screw the device tightly.

8. End of operation

 If you are no longer using the device, pull the plug out of the socket.
 Store the device in a dry location.

9. Cleaning and care

 Before cleaning, pull the plug out of the mains socket. Use a dry, soft cloth for
cleaning. Avoid the use of chemical solutions and cleaning products because
these may damage the device surface and/or markings.
 After longer periods of use, also clean the terminal clamps with a dry cloth to
maintain excellent contact with the terminals.
DE
FR
NL
EN
83