Protection Type; Handling Rechargeable Batteries - Medion MD 15526 Mode D'emploi

tive terminal!
 Before connecting to the mains, ensure that the mains power
source is the required 220–240 V~50 Hz!
 When plugging into the socket, touch the mains cable only
on the insulated area on the mains plug!
 Only touch the terminal clamps (positive terminal and nega-
tive terminal) in the insulated area!
 Unplug the charger from the mains before assembly, mainte-
nance or cleaning work!
 Do not expose the charger to fire, heat or long-lasting tem-
perature effects above 45°C! The charger's output power falls
automatically at higher temperatures.
 Disconnect the device from the mains before connecting/dis-
connecting the terminals on the battery.

3.4. Protection type

This device offers protection class IP65 in compliance with DIN
EN 60529. This means:
• The device is dust-proof and fully protected from contact.
• The device is protected against water jets from any angle.

3.5. Handling rechargeable batteries

 Do not use the charging and trickle charging process on bat-
teries that cannot be recharged.
 Do not use frozen rechargeable batteries!
 Do not use damaged or corroded rechargeable batteries.
 Never dismantle, open or cut up rechargeable cells or batter-
ies.
 Never expose cells or batteries to strong heat or fire. Avoid
storage in direct sunlight.
 Never short circuit cells or batteries.
 Please note that when charging batteries a highly explosive
gas detonation mixture can occur. There is a risk of explosion
for improper use. Therefore please note:
DE
FR
NL
EN
73