Detour Based On; Reference; If This Message Appears; Specifications - Alpine HCE-100XM Mode D'emploi

Detour Based On

When you select "Detour" in the Traffic Incident List screen
or press the DETOUR key on the remote controller, the
Navigation shall allow you to detour your route based on the
setting you have chosen.
Setting item: Detour Based On
Setting content: Traffic (Initial setting) / Distance
Traffic: The system shall perform a detour by
considering traffic congestion reported
along the route within 30 miles ahead of the
vehicle.
Distance: The system shall perform a detour by
considering distance selected by the User
only.
• At present traffic information is not available for all cities.
Please contact XM for updated information on traffic
coverage for your area.

Reference

If this Message Appears

Various messages are displayed on the screen during
operation. In addition to the messages telling you the current
status or providing guidance for the next operation, there are
also the following error messages. If one of these error
messages is displayed, carefully follow the instructions in the
solution column.
Check Antenna.
• The XM antenna is not connected to this unit.
- Check whether the XM antenna cable is attached securely to
this unit, then turn the ignition off and on again.

Specifications

External dimensions

Width
Height
Depth
Weight
160 mm (6-1/4")
40 mm (1-9/16")
120 mm (4-3/4")
610 g (1lb 6 oz)
9
-EN