Getting Started; Turn On The Unit; Automatic Station Scan; Setting Supply For Active Antenna - Alpine TUE-DAB1U Manuel D'utilisation

Getting Started

Connect the DAB antenna and make sure all other connections are done according to the system connection
chart in the back of this manual.

Turn on the unit

1. Turn on the vehicles ACC or IGN. (Or Start the vehicle)
2. When the unit has power, the POWER LED indicator will
illuminate green.
Power LED
3. Select the AUX input on your Alpine AV or AVN unit.

Automatic Station Scan

The TUE-DAB1U will automatically start a scan for available stations.
Once the scan is done, playback of the first station in the list of stations
will start. If there are only few stations found, please check if your
antenna needs 5V phantom feed. The default setting for phantom feed
is 'OFF'.

Setting Supply for Active Antenna

Push the MENU button on the playback screen.
Select Antenna from the Menu Screen.
8
-EN