Installation - SORHEA BIRIS II 50 Notice D'installation

SORHEA
3

INSTALLATION

For wall mounted installations, use the provided screws and lag shields.
Drill 4 holes and install the lag shields using the template below:
Screw covers
Open the 4 screw covers
to mount the column.
Removal / Reinstallation of the infrared cover
Unscrew the 2 screws fastening the infrared cover and remove them.
Position the infrared cover on the plate then screw in the two fastening screws.
2 M4 mounting screws
Passage of the screw
- 20 -
BIRIS II 50 47 mm
BIRIS II 100 65 mm
BIRIS II 200 65 mm
BIRIS II 50/100/200
X
X Y
315 mm
367 mm
367 mm