Reset The Filter Lifetime Counter - Philips AC4012 Mode D'emploi

8 Reset the filter
lifetime counter
When you replace the filters, it is important
that you also reset the filter lifetime counter
afterwards. This allows the purifier to be in sync
with the filter lifetime.
After you have replaced the filters, reset the
filter time:
1
Switch off the purifier and unplug it.
2
Replace the air purifier filters (see
'Replace the filters').
3
Put the plug in the power socket and
switch on the purifier again.
EN
18
4
Press and hold the
seconds.
Note
•
Reset the purifier when it is plugged in and
switched on.
•
Only replace the filters when you see the
light goes on.
button for 2