Remote Control - LOTRONIC AFX LiGHT LASER-TEXT300RGB Manuel D'utilisation

4) Indicator
- Red : Long Auto program
- Flashing Red : Short Auto program
- Flashing Blue: Short auto program (flashes only when sound is detected by the mic). The indicator
remains on and the laser is black out when no sound is detected for more than 3 seconds.
- Flashing Red & Blue: Time mode
- Red & blue : Text mode
- Laser Off: Off to save power. Flashes when it receives an IR signal
5) Pattern size control button
To adjust size of pattern
6) Power supply socket
Connect in this socket the power supply (provided with the device)
7) Keyboard input
Connect your keyboard on this socket (use the PS2/USB adapter if your keyboard requires this kind of
connection)
8) Safety key
Prevents the laser to be used by unauthorized persons
9) Reset button
Restores factory settings

REMOTE CONTROL

- ON/OFF
o Press this button to enable or disable the blackout mode
o Press this button during 2s to turn the device into power save status. Press again to switch on
- AUTO
Press Auto button to select Auto mode. It will play show randomly. You can choose different programs via the
numeric keys
- MUSIC
o Press music button to enter into sound mode. It will play program randomly
o Press Sound button during 2s to adjust sensitivity of mic. Use numeric key to set the sensitivity (1 is the slowest)
- PAUSE
Press it, program and color will be paused. Press again to continue playback
©Copyright Lotronic 2014 LASER-TEXT300RGB