LOTRONIC AFX LiGHT LASER-TEXT300RGB Manuel D'utilisation page 3

•
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power
cord by the plug. Never pull out the plug by tugging the power cord.
• DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
•
Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that
their effectiveness is impaired, for example by cracks or deep scratches.
•
The lamp shall be changed if it has become damaged or thermally deformed
•
Never look directly into the light source, as sensitive persons may suffer an epileptic shock.
• Do not use the light when the cover is open.
• Do not shake the device. Avoid brute force when installing or operating it.
•
When choosing the installation spot, please make sure that the device is not exposed to extreme heat, moisture
or dust. The minimum distance between light-output from the projector and the illuminated surface must be
more than 1 meter. Keep a distance to any flammable objects of at least 5m.
•
Operate the device only after having familiarized yourself with its functions. Do not permit operation by person
not qualified for operating the device. Most damages are the result of unprofessional operation.
• Please use the original packaging if the device is to be transported.
•
For safety reasons, please be aware that all modifications on the device are forbidden. Furthermore, any other
operation may lead to short-circuit, burns, electric shock, lamp explosion, crash, etc. If this device will be
operated in any way different to the one described in this manual, the product may suffer damages and the
guarantee becomes void.
LASER FOR PROFESSIONAL USE ONLY
This laser complies with the international standards CEI60825/EN60825. It is meant exclusively for professional use.
Its installation and use should only be carried out by a skilled technician who is aware of the specific dangers of
lasers.
DESCRIPTION
1) Mode selector button
- Press mode to select between time mode, auto mode, text mode and sound mode
- Press mode during 2s to enter into power saving mode. Press again to go back to power on mode ( same
function as power switch button )
2) Mic
Mic is used to receive sound in sound mode
3) IR sensor
IR sensor receives data from the remote control. Never obstruct this part or the remote control cannot
operate.
©Copyright Lotronic 2014 LASER-TEXT300RGB