Attaching/Removing The Infant Carrier - KIDDY Click'n Move 3 Guide D'utilisation

To remove the infant carrier adapters from the chassis press both locking buttons
downwards so that these indicate "red" (fig. 45; no. 1) and pull the adapters up-
wards (fig. 45; no. 2).

6.2 Attaching/removing the infant carrier

WARNING
Make sure that your child is secured in the infant
carrier like described in it's operating manual.
Attach the infant carrier against driving direction on the adaptors (fig. 46)
Hold both buttons at the handle of the infant carrier pushed (fig. 47; no. 1).
Turn the handle in frontal direction until the handle buttons lock in place
(fig. 47, no. 2).
WARNING
Ensure before using that the adaptors and the
infant carrier are engaged!
To remove the kiddy infant carrier push both handle buttons and turn the handle
in carrying position.
WARNING
Ensure that both handle buttons are engaged.
Now the infant carrier can be removed from the adaptors.
EN
53 53