Setting Fanspeed - Jaga BRIZA 12 Instructions D'installation

2.2. SETTING FANSPEED
2.2.1. Without control panel
1. Select the mode that you want to adjust : Cooling
2. Short press [-] or [+] to adjust the preset speed .
-
The blue LED flashes quickly when the
minimum speed is reached
FANSPEED %
20 25 30 35
3. After 30 seconds, the new settings are automatically saved and the device returns to the selected
mode.
2.2.2. With control pannel
1. Select the mode that you want to adjust : Cooling
2. Select the speed that you want to adjust : Speed 1
3. Short press [-] or [+] to adjust the preset speed .
-
The blue LED flashes quickly when the
minimum speed is reached
FANSPEED %
20 25 30 35
4. After 30 seconds, the new settings are automatically saved and the device returns to the selected
mode.
44
.
40 45 50 55
.
40 45 50 55
JAGA NV | BRIZA 12 - JDPC.002 | MANUEL | 05.07.2021 | V.08
/ Heating
The red LED flashes quickly when the
maximum speed is reached.
70
60 65 75
/ Heating
/ Speed 2 / Speed 3
The red LED flashes quickly when the
maximum speed is reached.
70
60 65 75
-
80 85 90 95
-
80 85 90 95
100
100