Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch PST 900 PEL Notice Originale

 Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.

Product Description and Specifications

Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The machine is intended for making separating cuts and cut-
outs in wood, plastic, metal, ceramic plates and rubber while
resting firmly on the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw blade recom-
mendations are to be observed.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Lock-on button for On/Off switch
2 Thumbwheel for stroke rate preselection

Technical Data

Jigsaw
Article number
"Cut Control"
Stroke rate control
Stroke rate preselection
Orbital action
Rated power input
Output power
Stroke rate at no load n
0
Stroke
Cutting capacity, max.
– in wood
– in aluminium
– in non-alloy steel
Bevel cuts (left/right), max.
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Bosch Power Tools
3 On/Off switch
4 Vacuum hose*
5 Vacuum connection
6 Base plate clamping lever (PST 1000 PEL)
7 Base plate
8 Adjusting lever for orbital action
9 Switch for sawdust blowing device
10 Dust cover for vacuuming
11 Sliding shoe (PST 1000 PEL)
12 "Cut Control" viewing window
13 "Cut Control" base
14 Worklight
15 Handle (insulated gripping surface)
16 Stroke rod
17 SDS clamping lever for saw blade release
18 Guide roller
19 Saw blade*
20 Contact protector
21 Saw blade storage (PST 900 PEL/PST 9500 PEL)
22 Splinter guard*
23 Lead for the parallel guide
24 Screw (PST 900 PEL/PST 9500 PEL)
25 Scale for mitre angle
26 Parallel guide with circle cutter*
27 Locking screw for parallel guide*
28 Centring tip of the circle cutter
29 Cutting mark, 0°
30 Cutting mark, 45°
31 Cutting mark, 45° (with sliding shoe) (PST 1000 PEL)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
PST 900 PEL
3 603 CA0 2..




W 620
W 340
-1
min 500–3100
mm 23
mm 90
mm 15
mm 8
° 45
kg 2.1
/II
English | 15
PST 1000 PEL PST 9500 PEL
3 603 CA0 3.. 3 603 CA0 2..




650
360
500–3100 500–3100
23
100
20
10
45
2.2
/II
1 609 92A 0R8 | (13.11.14)




620
340
23
95
15
8
45
2.1
/II