HQ Power PROMIX1212E Notice D'emploi page 5

11. PEAK LED
The PEAK LED illuminates when a channel is going into overload.
It detects the peak level after the EQ and will light at 3dB before
clipping to warn that the signal is approaching overload. You do
not want the PEAK LED to light except very intermittently during a
take or a mix. If it does light persistently, reduce input gain with
the TRIM control (4).
12. PFL Selection Switch
The PFL (Pre-Fader Listen) switch enables monitoring the mono
signal of any channel(s) selected (button depressed) at nominal
levels through the headphones or control room monitor outputs.
The signal is post EQ and independent of the channel fader's
position.
13. L-R Selection Switch
When the L-R switch is depressed, the post-fader channel signal
is fed to the master L-R faders.
14. G1-2 Selection Switch
This switch enables to select the channel for routing to the G1-2
stereo bus, controlled by the master G1-2 fader. This signal is
post-fader and the stereo placement is adjusted by the PAN control. The G1-2 bus
offers you a second stereo submix with its own stereo G1-2 submaster fader. It can
be used as a convenient mixing aid both live and in the studio.
15. Channel FADER
This fader allows users to adjust the signal level from the corresponding input
channel that is to be sent to the destinations selected by the 1-2 and L-R buttons.
b. Stereo Input
4. TRIM
The stereo TRIM control operates in the same manner as the mono TRIM control.
The stereo inputs are designed for any line level signal. Most line level sources such
as MIDI instruments and effects units will have their own output level control.
However, any added adjustment necessary for proper levelling can be done with the
TRIM control.
5. EQUALIZER
The stereo EQUALIZER operates in the same manner as the mono EQUALIZER.
The left and right signals will be affected equally. Using one stereo equalizer is
generally preferable to using two mono equalizers when equalizing a stereo signal as
it avoids possible discrepancies between the left and the right settings.
6. AUX SEND 1, 2
Same function as for the mono channel.
8. FX Control
Same function as for the mono channel.
9. MON Control
Same function as for the mono channel.
11. PEAK LED
Same function as for the mono channel.
12. PFL Switch
Same function as for the mono channel.
13. L-R Selection Switch
Same function as for the mono channel.
14. G1-2 Selection Switch
Same function as for the mono channel.
15. Channel FADER
Same function as for the mono channel.
PROMIX1212E_v2
5 HQPOWER