Important Information; Installation Information - DURAVIT DuraPlan 720079 Notice De Montage

Important information

About the mounting instructions
These mounting instructions comes as part of the
Duravit shower tray and should be read carefully prior to
installation.
Explanation of the key words and symbols
NOTE! For avoiding property damage
Link to installation information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and leak-tightness
Target group and qualification
The shower tray must only be installed by trained
specialists.
NOTE!
Local installation regulations and any country-specific
standards must be observed at all times.
6
DU_M_DuraPlan/13.01.8

Installation information

Please read pre-installation datasheets prior to the
installation. These are available to download on the
Internet at www.duravit.com.
1
Shower tray with drain fittings horizontal
(Diagram 1)
Floor Necessary measure
construction
50 x 70 mm Floor voids for drain fittings and waste
water pipe or platform around the
shower area provided by the customer
71 x 134 mm • Floor voids for drain fittings and waste
water pipe or platform around the
shower area provided by the customer
• DuravitRapid base element or screed
base to the required height
≥ 135 mm DuravitRapid base element or screed
base to the required height
Shower tray with drain fittings vertical
Openings needed, fire protection sleeve required where
appropriate
* dependent on the floor covering, 10 mm in this case
ø 200
ø 200
ø 90