Connection Diagram - Velleman CAMCOLBUL2DC Notice D'emploi

CAMCOLBUL2DC – WATERPROOF COLOUR CCD BULLET CAMERA – DC VERSION
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the
environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a
specialised company for recycling. This device should be returned to your distributor or to a local recycling
service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.

2. Connection Diagram

1. monitor
2. adapter (optional)
3. camera
4. red plug (to power)
5. yellow plug (to video input)
1) Plug the yellow plug cable (5) in the monitor (1).
2) Connect the red RCA plug (4) to the adapter (2) (option: PS1205R).
3) Plug the adapter (2) into the mains.
4) Switch on the monitor (1).
CAUTION: Make sure to use the correct adapter (current of 500mA).
Be careful when placing the camera in front of a glass window.
CAMCOLBUL2DC_v2 3 VELLEMAN