Pioneer AVIC-D3 Manuel D'installation page 11

The navigation unit
10
RCA connector
Power cord
26 cm
Yellow/black
If you use an equipment with mute function, connect that equipment to the
Audio Mute lead. If not, keep the Audio Mute lead free of any connections.
Note:
Audio source will be set to mute or attenuate, while the following sounds
will not be muted or attenuated. For details, see the Operation Manual.
- voice guidance of the navigation
- incoming ringtone and incoming voice of the mobile phone that is
connected to this navigation system via Bluetooth wireless technology
Note:
The aerial will automatically retract, yet the timing
varies depending on the setting. (Refer to page 5.)
For more detailed information on changing the "ANT
CTRL" mode, refer to "Switching the auto aerial
setting" in the Operation Manual.
For information on other leads
Blue (*6)
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect *6 and
*7 when Pin 5 is an aerial control type. In
other types of vehicle, never connect *6 and *7.
10
See Page 11.
Blue (*7)
To Auto-aerial relay control terminal
(max. 300 mA 12 V DC).
Note:
Cords for this navigation system and those
for other products may be different colours
even if they have the same function. When
connecting this navigation system to
another product, refer to the supplied man-
uals of both products and connect cords
that have the same function.
FUSE (10A)
When replacing the fuse, be sure to only use a
fuse of the rating prescribed on this product.
(*8)
10