Tempo Fitness 632T Manuel D'utilisation page 8

ASSEMBLY STEp 5
HARdWARE bAG 5 CONTENTS :
SCREW (G)
15 mm
Qty: 4
CONSOLE
BOTTOM CONSOLE COVER
SCREWS (G)
CONSOLE MAST
14
632T_OM_rev1_2.indd 14-15
Open hardware bag 5.
A
Slide right bottom console cover up
B
console mast and align screw holes. Attach
bottom console cover to console
using 2 screws (g).
Repeat on other side.
C
Connect power plug to a power outlet. The ON/
D
OFF switch is located next to the power cord.
Flip this switch to the 'ON' position, so that
the switch is lit. You will hear a beep and the
console will turn on.
Before the first use, lubricate the treadmill
E
deck by following the instructions in the
MAINTENANCE section in the TREADMILL
gUIDE.
YOU ARE FINISHED!
TREADMILL OPERATION
This section explains how to use your treadmill's console and programming. The BASIC OPERATION section in the
TREADMILL gUIDE has instructions for the following:
• lOCATION Of THE TREAdMIll
• USING THE SAfETy kEy
• fOldING THE TREAdMIll
• MOVING THE TREAdMIll
• lEVElING THE TREAdMIll
• TENSIONING THE RUNNING bElT
• CENTERING THE RUNNING bElT
• USING THE HEART RATE fUNCTION
15
4/25/11 3:44 PM