Front Panel; Rear Panel - Yamaha MT400 Mode D'emploi

12

Front Panel

h
PHONES
A pair of stereo headphones can be connected here for
monitoring. The headphone signal is the same as the
MONITOR OUT signal.
i
PUNCH I/O
An optional footswitch, such as the Yamaha FC5, can be
connected here for foot-controlled punch in/out.

Rear Panel

j
POWER ON/OFF switch
Use this switch to turn on and off the MT400.
k
DC 12V
Connect the AC adapter here.
l
SYNC OUT
Use this phono jack to individually output FSK and SMPTE synchronization signals recorded
on the sync track (Track 4).
m
MONITOR OUTs
Use these phono jacks to send the monitor signals. Connect your hi-fi system or powered
speakers.
n
STEREO OUTs
Use these phono jacks to output Stereo bus signal adjusted by the STEREO fader. Connect
them to your master recorder's stereo inputs for mixdown.
—Owner's Manual
POWER DC 12V
ON/ OFF
j k
h i
PHONES PUNCH I/O
SYNC OUT MONITOR OUT STEREO OUT
R L R L
l m n