Baninni ROOM LERNO BNBTA021 Mode D'emploi page 12

METHOD 1
Use the short screw
to secure the
bedgate to the bed
Installing the bedrail, there are two methods of installation.
Method 1, lift the mattress off the bed, position the bed rail, and screw
directly into the bed base or lath securing the bed rail in place.
Method 2, use the bedrail tethers provided, using the hooped end, slide over
the bedrail leg upright, lay the tether across the beds base and replace the
mattress, make sure the steel plate on the tether is upright against the
mattress and adjust the tether to suit the beds width making sure the bedrail
is secure and tight against the mattress.
METHOD 2