Télécharger Imprimer la page

Baninni ROOM LERNO BNBTA021 Mode D'emploi page 11

Publicité

Les langues disponibles

Les langues disponibles

H : short screw
E
Connect the bottom rail together before sliding
through the fabric, Note, make sure letters C+D
are connected together. Connect the small end
first, then at the opposite side pull back the
plastic connector and slide over the larger end,
and connect in place.
E
I : long screw
C
Connect the first leg upright,
Note, once connected, pull the
fabric carefully down over the
hinge, Repeat the process on
the opposite side.
D

Publicité

loading