Pioneer AVIC-HD3II Manuel D'installation page 11

Connecting the System
The navigation unit
Power cord
Blue (*6)
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect *6 and
*7 when Pin 5 is an aerial control type. In other
types of vehicle, never connect *6 and *7.
RCA connector 1
16 cm
Yellow/black (MUTE)
If you use an equipment with mute function, connect that equipment to the
Audio Mute lead. If not, keep the Audio Mute lead free of any connections.
Note
Audio source will be set to mute or attenuate, while the following sounds
will not be muted or attenuated. For details, see the operation manual.
- voice guidance of the navigation
- incoming ringtone and incoming voice of the mobile phone that is
connected to this navigation system via Bluetooth wireless technology
Note
The aerial will automatically retract or turn off, yet the timing varies
depending on the setting.
Blue (*7)
To auto-aerial relay control terminal. If the vehicle has a glass
aerial, connect to the aerial booster power control terminal (max.
300 mA 12 V DC).
(*8)
Engb
Section
02
11