Jacob Jensen Telephone 3 Manuel D'utilisation page 20

20
Assembling .the .table .stand .and .telephone .cords
Slide the canals of the table
stand into the tracks of the
base. The table stand is
mounted when you hear a
click.
Fit the modular contact of the
coiled cord into the plug of
the handset.
Disassembling .the .table .stand
Disconnect the coiled cord
and the line cord from the
base. Push the button inside
the square hole next to the
modular jack using a pen or
a finger, and pull the bracket
away from the base at the
same time.
Fit the modular contact of the
coiled cord into the plug of
the telephone.
Connect the line cord to the
base and to the telephone
wall outlet.