Removing (Disassociating) A Handset; Base Setting; Dialling Method - THOMSON Speedtouch D150 Manuel D'utilisation

STD150.qxd 12/05/04
Then, on the handset which has not yet been registered: you have about
2 minutes to register the handset.
Press to enter the menu.
l
Select "HS register" and press
l
Select the base with which the handset is to be associated and press
l
to confirm.
A message will appear on the screen within 15 seconds and press
"
Enter the PIN code: 1590 (by default) and press
l
The number of the handset will be displayed within 15 seconds.
"
If this fails, repeat the complete operation.
6.2

REMOVING (DISASSOCIATING) A HANDSET

This operation can only be performed using the handset you want to remove
(disassociate).
Press to enter the menu.
l
Select "BS Setting" and press
l
Enter "MASTER PIN:" 1590 (by default) and press
l
Select "Remove HS" and press
l
Enter the number of the handset you are removing (disassociating) and
l
press to confirm.

7. BASE SETTING

7.1

DIALLING METHOD

You can choose tone or pulse dialling. The default is tone dialling.
Press to enter the menu.
l
Select "BS Setting" and press
l
Enter "MASTER PIN:" 1590 (by default) and press
l
Select "Dial Mode" and press
l
Select "DTMF Dial" or "PULSE Dial" and press
l
14:02 Page 43
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
.
43