Thermador PROFESSIONAL PCG30 Manuel D'installation page 11

Minimum 3/4" (19 mm)
9"
(229 mm)
2¾" (70 mm) Vertical Distance
Between Cutouts
(See Side View for Wood Support)
Figure 8a: Installation of 48" rangetop above two side-by-
side THERMADOR warming drawers - Model No. WD24
3" (76 mm)
Min.
3-Prong grounding type receptacle
connected to a properly grounded and
polarized electrical supply rated at 120VAC,
10 Amps, (or 15A*) Single Phase, 60 HZ.
All Installer supplied parts must conform to Local Codes.
* 15 Amp 120 VAC electrical supply is required for 36" and 48" models with an electric griddle.
0" to 1¼"
(0 - 32 mm)
See Fig. 4
and Table
Dimension C
1⅞" (48 mm)
Horizontal Distance
Between Cutouts
Threading compounds must be
resistant to Propane Gas
1/2" (12.7 mm) NPT
Power
Cord
Plywood support
Install additional
wood support along
front edge of cutout
Figure 8b: Installation of 48" rangetop above two side-by-
side THERMADOR warming drawers - Model No. WD24
(Side View)
Product Rating
Label/Serial Tag
3/4" (19 mm) flex line
GAS
FLOW
A manual valve must be installed
external to the appliance, in an acces-
sible location from the front, for the
purpose of shutting off the gas supply.
11 16 "
7 /
(195 mm)
2¾" (70 mm)
minimum
between
cutouts
Figure 9: Bottom of Unit
English 9