Manual Cook Entry Mode; Manual Cook Mode; End Of Cook Cycle Mode; Preset Program Cook Mode - Rotel U1551CH Mode D'emploi

immediately enter Ready Mode. OR if press «Start» button, the oven will go into work-
ing mode.

Manual Cook Entry Mode

o This mode allows the user to manually enter a cook time and power level.
o While the oven is in the Ready Mode, pressing the
will put the oven into Manual Cook Entry Mode.
o During this mode, "00:00" displays
o If you press "Hold 0%", "Defrost 20%", "Medium 50%" or "Med-Hi 70%" button to
select power level, LED will display the related power. If the same button pressed
twice, the power will change to PL10 (High 100%). If no power chosen, "PL10" is de-
fault.
o During setting process, press «Start» button to enter Manual Cook Mode.
o Press
«Stop/Reset» button

Manual Cook Mode

o This mode allows the cooking of the food items.
o Pressing the «Start» button will cause to the oven to begin Manual Cook Mode.
o During this mode, remaning cooking time displays. The fan and oven lamp will work.
o When cooking program finish, the oven will enter End of Cook Cycle Mode. If you press
«Stop/Reset» button

End of Cook Cycle Mode

o After the time has expired in a Manual Cook Mode, or a Preset Program Cook Mode,
the oven shall go into The End of Cook Cycle Mode.
o During this mode, "End" displays.
o If either User Option 1, EOC Tone, OP:11 or OP:12 is selected, the oven shall continue
to sound until the user acknowledges this by either opening and closing the door or
pressing the
«Stop/Reset» button
oven shall go into Ready Mode.

Preset Program Cook Mode

o This mode allows cooking of food items through a one pad touch operation. While in
Ready Mode, pressing one of the ten digit keys on the keyboard will cause the oven
to run the Preset Program associated with that key.
o LED displays the remaining cooking time. If it is multi-stage cooking, the total reman-
ing cooking time displays, not a particular stage cooking time.
o If the program chosen exceeds the maximum time allowed by User Option 7, Max
time, then the oven shall beep three times rapidly and display 00:00, to indicate that
the program is unacceptable.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
to enter Ready Mode.
under this mode, the oven will enter Pause Mode.
. If OP:10 is selected, after the 3 seconds beep, the
78
on the keyboard
«Time Entry» button