Bose SOLO 5 Notice D'utilisation page 30

A LT E R N AT E S E T U P
Connecting two sources to the soundbar
If you do not get sound from any source, such as a DVD/Blu-ray Disc™ player,
cable/satellite box, game system or DVR, connected to your TV, connect it to the
soundbar. Use only one audio cable for each source.
1. On the back of each source, locate the Audio OUT (digital) connector panel.
2. Choose a separate audio cable for each source using either Option 1 or Option 2
(see page 31).
Note: You MUST use either Option 1 or Option 2. Do not use the coaxial cable and
optical cable at the same time.
3. If you have not already, disconnect your TV from the soundbar.
4. Separately connect the chosen audio cable from each source's Audio OUT (digital)
connector panel to the soundbar.
Note: Do not disconnect your source's video cable, such as an HDMI™ cable, from
your TV.
Option 1
This figure shows two source connections using an optical cable and 3.5 mm to RCA
stereo cable (not provided).
CAUTION: If using an optical cable, remove the protective caps from both ends.
Inserting the plug in the wrong orientation can damage the plug and/or
the connector.
Audio OUT Source 1
3.5 mm to RCA
stereo cable
(not provided)
3 0 - E N G L I S H
Audio OUT Source 2
Soundbar
connector panel