Parts List - BLUE CHIP AXON AIX-103 Mode D'emploi

Parts List

Before you install the AIX-103, please make sure you have all of the parts listed
below.
G AIX-103 Main Unit
(Divided Pickup + Controller)
G Divided Pickup Attachment Parts
• Spacer A (Thickness: 1mm)
............... 10 Pieces
• Pickup Double-Sided Adhesive Tape
............... 16 Pieces
• Small Screws
3x6mm, with washer .................. 2
Used to attach the pickup fittings to the
base plate.
• Base Plate (Right, Left) ....... 1 Set
G Controller Attachment Parts
• Bracket ................. 1
• Tapping Screw
3x16mm ............... 1
Used to attach the controller to the
body.
5
G Direct Bass Guitar Cable
• Spacer B (Thickness: 0.3mm)
............... 12 Pieces
• Springs ..... 2 Pieces
• Small Screws
3x6, 3x8, 3x10, 3x12mm .. 2 each
Used to attach the pickup to the pickup
fittings.
• Double-Sided Adhesive Tape for
Base Plate ..................... 8 Pieces
• Velcro Fastener ... 1
• Controller Cushion
(Double Sided-Adhesive Tape)
................. 6 Pieces
G Clearance Gauge
................. 2 Pieces
• Pickup Cushion
(Double-Sided Adhesive)
................. 8 Pieces
• Tapping Screws 3x25mm ............. 2
Used to attach the pickup to the body.
• Plate Tapping Screws
3x10mm, 1 type .............. 2 pieces
Used to attach the base plate to the bass
body.
• Pickup Attachment Fittings
(Right, Left) .......................... 1 Set
• Suction Cups ................. 3 Pieces