Nomenclature & Functions - BLUE CHIP AXON AIX-103 Mode D'emploi

Nomenclature & Functions
Divided Pickup
Controller
q Divided Pickup
This magnetic type pickup converts vibrations
from the bass guitar's individual strings into an
electrical signal.
The pickup is attached to the bass guitar's body.
→ page 6 "Attaching the Divided Pickup"
w Synth Volume Control
Controls the volume of the synthesizer.
* Does not adjust the volume of the bass guitar .
e Power Indicator
The AIX-103 is receiving power from the AXON
Guitar MIDI Converter when this indicator is lit.
The indicator lights when the AIX-103 is properly
connected to the AXON via the 13-pin cable.
r Direct Bass Guitar Input Jack
This jack allows the AIX-103 to receive the
combined output from the bass guitar's normal
pickups (bass guitar signal) from the guitar's
output jack. Use the supplied direct bass guitar
signal cable when making connections.
The bass guitar signal is output from the GUITAR
DIRECT OUT jack of the AXON .
y
q
t
u
i
t AIX-103 Output Jack
The selected signal from the Output Selector is
transmitted to the Guitar MIDI Converter via this
jack.
y Output Selector (BASS/MIX/SYNTH)
Selects the type of output to be delivered via the
13-pin cable connector to the Guitar MIDI Con-
verter.
BASS: Only the direct bass sound (output from
the electric bass pickup) will be heard.
SYNTH: Only the synthesizer sound (output from
the divided pickup) will be heard.
MIX: Both the direct bass guitar signal and the
synthesizer sounds will be heard.
u UP Switch
i DOWN Switch
According to settings in the Guitar MIDI Con-
verter, these switches can be used to increase or
decrease the values by 1 for program memory
numbers, parameter values, program change
numbers, octave shift values, etc.
→ Refer to the manual for your Guitar MIDI
Converter for further information.
* AXON owner's manual
r
e
w
4