Reliable The Empressa S550 Guide D'utilisation page 9

STEP 3: TURNING ON THE POWER
a. M ake sure the locking knob (D) is in the open position allowing free move-
ment of the pressing plate before plugging in the appliance.
b. Lift the pressing plate to the fully raised (up) position.
c. Plug the appliance into an electric outlet.
d. Press the *POWER* button and the Red Power light will shine.
STEP 4: SELECTING THE TEMPERATURE
Press the *SELECT* arrow buttons to choose the kind of fabric you wish to
press. Press
tion to lower setting.
a. Examine the garment label if unsure and look up the type on the chart.
IMPORTANT NOTE: If you cannot determine the type of fabric, begin with the
lowest setting and increase the temperature as desired until you obtain the
proper results.
07
to move selection to higher setting and press to move selec-