geo-FENNEL FIRT 1600 Data Mode D'emploi page 19

FUNCTIONS (MIN / MAX / DIF / AVG / LOG)
Power on the instrument by pulling the trigger and press MODE until one of the symbols MAX, MIN,
DIF , AVG appears in the display.
Select the function requested with the buttons UP and DOWN and confirm by pulling the trigger. Alter-
natively press MODE to go to the next function.
Description of functions
MIN
The lowest value measured during the measurement is displayed (small figure on top).
MAX
The highest value measured during the measurement is displayed (small figure on top).
DIF
The difference value between the highest and lowest value measured is displayed (small figure on top).
AVG
The average value of the last IR measurement is displayed (small figures on top).
LOG
Storage function.
MENU
The functions of the instrument can be selected in the
menu. Pull the trigger to power on the instrument and
press the button MODE. Now all functions can be chosen
with the buttons UP and DOWN as per the diagram:
MAX / MIN / DIFF
>
EMISSIONSWERT
EMISSIVITY
DAUERMESSUNG AN / AUS
LOCK ON / OFF
ALARM HOCH AN / AUS
HIGH ALARM ON / OFF
EINSTELLUNG ALARM HOCH
HIGH ALARM ADJUSTMENT
ALARM NIEDRIG AN / AUS
LOW ALARM ON / OFF
EINSTELLUNG ALARM NIEDRIG
LOW ALARM ADJUSTMENT
°C / °F
EN
19