Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Hilti TE 75 Combihammer
Kit supplied with TE 75
1 plastic case, 1 cleaning cloth, 1 Hilti insert tool grease, operating instructions
This Product is
UL listed and CSA certified
R
Noise and vibration
Noise level of the tool is lower than 108 dB (A):
Wear ear protection.
The typical weighted acceleration is 11 m/s
Do not use this product in any way other than as directed by these operating instruc-
tions.
Please refer to the respective regulations of your trade association and the enclosed
Safety Precautions.
Printed: 07.07.2013 | Doc-Nr: PUB / 5071192 / 000 / 00
Always wear safe-
Always wear pro-
Always wear ear
ty glasses.
tective gloves.
protectors.
2
.
Technical data
Power input:
Voltages:
Current input:
Frequency:
Weight:
Dimensions:
Speed under load:
Hammering speed under load:
Single impact energy:
Drilling perf. in medium-hard concrete:
Drill bits for concrete:
Insert tools:
TE-Y helical drill bits:
TE-Y GB breach bits:
TE-Y-BK core bits:
TE-Y adaptors for: TE-C drill bits, quick-release chuck for twist drills for wood and steel, setting
tools for HVA anchor
Chisels: Pointed, narrow flat, wide flat, flexible, hollow, wide channel, narrow channel and scoop
type in heavy-duty and some in light-duty versions
Chuck: TE-Y
Settings: «Rotary hammer drilling», «Chiselling only» and «Neutral»
With slip clutch
Permanent lubrication
Side handle adjustable through 360° with depth gauge
Variable speed control switch with infinite regulation
Electronic speed regulator to improve convenience
Hammering power regulator: max. = 100%, min. = 50%
Protective earthing (grounded)
Radio interference suppression as per directives 76/889/EC + 82/499/EC
Radio and TV interference suppression as per EN 55014
Servicing indicator with warning lamp
Right of technical modifications reserved
1050 W
115 V
10 A
50–60 Hz
7.9 kg
495×259×114 mm / 19.5"×10.2"×4.5"
255 and 185 r.p.m.
2700 and 1950 blows/min.
8.0 Joule / 4.0 Joule
25 mm (1") dia. = 100 cm
3
/min.
= 200 mm/min.
10–80 mm dia. (optimum 22–37 mm dia.)
"–3" (optimum
"–1
")
3
/
7
/
1
/
8
8
2
"–1
" dia.
12–37 mm /
1
/
1
/
2
2
"–3" dia.
40–80 mm / 1
1
/
2
"–6" dia.
45–150 mm / 1
3
/
4
Publicité
Table des Matières
